DVR

Recomendações da Hikvision sobre direcionamento de portas
0 Remote access

Recommendations of the Hikvision about port direction

less than 1 minute It is widely known that the Internet is flooded by constant cyber attacks. Once connected to the Internet, the devices will face all kinds of security problems. Therefore, it is generally recommended that the devices are not connected directly to the Internet, unless there are special-purpose access. No direct access to external network, the likelihood of being attacked device will be greatly reduced. Yet, this does not preclude the possibility of an attack. When it is necessary to make a device Continue→

Como descobrir o IP do DVR
1 Remote access

How to find out the DVR's IP

less than 1 minute After I did the video teaching reset the password of DVR peloTelnet, many wonder how to tell the DVR IP without the password to access the network settings. So, I will show that post and as easy to find the DVR IP. Let's see here the two main ways of doing this, one is the configuration page of the modem / router and the other is using a network scan program, like Nmap. Ok, Let's go Continue→

Recuperar Senha do DVR Pelo Telnet
226 CCTV

Recover Password Of DVR Through Telnet

1 minute In some cases, customers do not access the system often, only when something happens and you have to get an important image, and it is then that discovers forgotten password. Or for any errors in the system, the password created no longer works. One of the most practical ways to solve this problem is to access the DVR system, through Telnet, and delete any password that has been created, thus leaving the DVR system with the default password from the factory. HE Continue→

Como transmitir imagem de DVR na página do seu site
78 Remote access

Transmitting DVR image on your site page

less than 1 minute I have seen many people asking, how to put the images of the DVR to appear, Live, on the homepage of the website. Using the RTSP protocol, we can do it in a very easy way. The first thing, to make, It is to check if your machine supports the RTSP protocol, for just look for the option “porta RTSP”. Usually you will find this option in the network settings or services. The default numbering for this port is 554, but that doesn't stop Continue→

Acesso Remoto Via Software de Monitoramento
59 Remote access

Remote Access Via Monitoring Software

less than 1 minute Is to access the system cameras through a program, known as CMS that is usually acquired with the equipment of the cameras, after installation of the program on a computer, sets up the program to access the camera system remotely over IP address and HTTP port or DDNS address and HTTP port. Remote access via the monitoring software is the simplest to do and easier to operate. Every camera system has software for Continue→

Problema acesso remoto DVR “Login failed. Please check your network environment.”
2 Remote access

Problem DVR Remote Access “Login failed. Please check your network environment.”

less than 1 minute In some cases even after enable ActiveX in Internet Explorer, You may give an error with the message: Login failed. Please check your network environment. Often the cause of this error is that the DVR is not compatible with new versions of IE. This can be remedied in a simple manner, configuring compatibility view. To do this, just go to Tools > Settings Compatibility View mode. And add the IP or domain to the mode of Continue→

Principais aplicativos para acesso remoto de câmera e DVR no celular (android)
120 Remote access

Major applications for camera and DVR remote access on mobile (android)

less than 1 minute After you have configured remote access a difficulty that many find, is the question of which application to use to access their cameras on cell phone. Typically each device has its own application, that comes with the installation CD, but nowadays there is a very wide range of equipment “generic” you don't have an application, and does not itself described which application to use. If you don't know which app to use on your camera or DVR, see the list below for applications Continue→

Configurando acesso remoto em stand-alone (DVR)
321 Uncategorized

Setting up remote access to stand-alone (DVR)

less than 1 minute Set up a DVR, ou stand-alone, to be accessed remotely is no big deal, but for those who have no experience below follows a step by step tutorial on how to set up your stand-alone to view your cameras from anywhere that has internet access. 1º Step: Check your network information Click start > run > type CMD and enter. In the Command Prompt that opened type ipconfig and enter. Write down the following information Continue→