Reading time: less than 1 minute
Like most computer equipment, factory default settings following settings according to the specific to each manufacturer policies. nevertheless, much of the equipment present passwords, users and addresses common standards for initial access, including popular standards like admin / admin.
This list will be constantly updated. If you have information about other manufacturers and camera models will be very welcome, you can enter details via the comments or the contact page.
Routers / Modems: ↓
Maker | User | Password | IP Standard |
---|---|---|---|
D-Link | admin | (in blank) | 192.168.0.1 |
Intelbras | admin | admin | 10.0.0.1 |
Livcom | admin | admin | … |
Multilaser | admin | admin | … |
admin | administrator | … | |
TP-Link | admin | admin | 192.168.0.1 |
DVR/Standalone e similares: ↓
Maker | IP adress | User | Password |
---|---|---|---|
ACTi | 192.168.0.100 | admin | admin |
ACTi | 192.168.0.100 | admin | (in blank) |
Asoni | 192.168.1.200 | admin | admin |
Asoni | 192.168.1.200 | admin | (in blank) |
AVTECH | 192.168.1.10 | admin | admin |
Axis | 192.168.0.90 | root | pass |
Axis | 192.168.0.90 | root | |
Basler | DHCP | admin | admin |
Brickcom | 192.168.1.1 | admin | admin |
COP | — | admin | (in blank) |
COPTEK | — | admin | admin |
— | admin | admin | |
— | admin | admin | |
Foscam | — | admin | (in blank) |
D-max | 10.20.30.40 | root | root |
FLIR | 192.168.250.116 | admin | fliradmin |
GIGA | — | admin | (in blank) |
GIGA | — | guest | (in blank) |
GIGA | — | default | (in blank) |
GIGA | — | root (telnet) | xc3511 (telnet) |
I record | — | admin | 1 |
HDL | — | admin | 12345 |
Hikvision | — | admin | 12345 |
Hunt Electronic | 192.168.1.200 | admin | admin |
iCanTek | DHCP | root | admin |
Intelbras | — | admin | admin |
Intelbras | — | default | (in blank) |
— | admin | admin | |
— | admin | admin | |
— | admin | admin | Intelbras | — | 888888 | 888888 |
Intelbras | — | 666666 | 666666 |
Intervision | — | admin | (in blank) |
Intervision | — | root (telnet) | xc3511 (telnet) |
— | admin | admin | |
— | admin | admin | Luxvision | — | admin | (in blank) |
Luxvision | — | guest | (in blank) |
Luxvision | — | root (telnet) | xc3511 (telnet) |
Posonic | — | admin | (in blank) |
Posonic | — | admin | 888888 |
Posonic | — | admin | 111111 |
Posonic | — | admin | 123456 |
Posonic | — | aa | 11 |
Posonic | — | guest | (in blank) |
Posonic | — | guest | 888888 |
Posonic | — | user | 666666 |
Sagemcom | — | admin | admin |
Sagemcom | — | admin (telnet / SSH) | admin (telnet / SSH) |
Tecvoz | — | admin | 1 |
Tecvoz | — | admin | 12345 |
Tecvoz | — | admin | (in blank) |
Tecvoz | — | guest | (in blank) |
VioStor | — | admin | admin |
Permalink
Hello,
I own a device purchased in 2015. model 6004A. In fact until now could not see what the device manufacturer, apparently is a Chinese. Found in some research and the pictures these would be CCTV DVR AHD 960H H.264 HDMI HD specifications 1080 p P2P
Unfortunately I lost the password to access the device. I wonder what procedures should I do to get the password or reset the device to factory defaults.
I appreciate all the help possible.
Mario Marinho
mariopaulomarinho@gmail.com
Permalink
Good afternoon,
Sends me a front picture of DVR, a photo of the login screen and a picture of the login page, the form on the link below.
https://www.interside.org/contato-imagem
Permalink
Good evening. I have a DVR Ivio and forgot the password, I would like to help me how I can reset this unit. grateful for the attention I'm waiting
Permalink
Good afternoon,
Sends me a front picture of DVR, a photo of the login screen and a picture of the login page, the form on the link below.
https://www.interside.org/contato-imagem
Permalink
I'm having the same problem as Daniel. I have a DVR ching ling V2 LM plate with THB7008T, I've tried everything possible with password generators. My problem started when I changed the admin password for remote access, that is, it does not work on these devices, now not access anything. I tried physical remains, more like I found manual, or anything on the Internet, almost burned a CI, most did not get anything.
Anyone know how to reset this board
Permalink
Good afternoon,
Sends me a front picture of DVR, a photo of the login screen and a picture of the login page, the form on the link below.
https://www.interside.org/contato-imagem
Permalink
Hello the image could send me a DVR? I can not find the password reset as giving, Thanks in advance for your comments. regards
The board also says so: THB7008T-LM-V2
Permalink
Hi, I have the same problem, the image could send me a DVR? I can not find the password reset as giving, Thanks in advance for your comments. regards
The board also says so: THB7008T-LM-V2.
Denilton could solve?
regards
Permalink
Good afternoon,
contato@interside.org
Permalink
Ola.
Thank you for the informations, password if DVR LUX VISION. It was clean (reset) and I could not, gave error unauthorized, but it was only to enter, and accepted. rs…
BUT…
I have a problem with this DVR, no case, from 16 channels:
Do not save anything, or does not recover anything qdo I try to look for some event.
From time to time the recorder itself resets.
I've taken the resale, They stayed with him a few days, they returned, It ran a time (I did not get to test – It was only at the time of device replacement),
and again did not write / retrieve anything.
It has a HD of a Terabytes.
Any idea what might be causing this?
I've been embarrassed a couple of times because of it…
Permalink
Good evening,
Already tested with other HD?
Permalink
Good Morning
not can not login
dvr level h 264 network dvr
modelo lv 3008 v
that is able to help because agtradeço
Permalink
Good afternoon,
Sends me a front picture of DVR, a photo of the login screen and a picture of the login page, the form on the link below.
https://www.interside.org/contato-imagem
Permalink
dear,
I have a DVR Newprotec (no manufacturer site) apparently is a generic of those Chinese who are running a firmware version V4.02.R11.00000142.12001.131600.00000 (taken from the web page) for 8 cameras. The inner plate has a THB7008T-LM-V2 label. This password locked asking to contact the engineering team. The point is that I used a daily password Luxvision and passed, it restarts but returns to the state asking password, when I put admin password and white shows the same message. I see no other way than to change the firmware, but do not seem to find where to download for not find the vendor's site. you could tell me if I can get a generic? how I could do to find another firmware? I am accessing via Rs232 and bootloader ta working well, I can run the run up, tftp sem problemas.
Daniel.
Permalink
Good afternoon,
Sends me a front picture of DVR, a photo of the login screen and a picture of the login page, the form on the link below.
https://www.interside.org/contato-imagem
Permalink
I am in the same situation as Daniel colleague.. managed to solve?
Permalink
Good afternoon,
Sends me a front picture of DVR, a photo of the login screen and a picture of the login page, the form on the link below.
https://www.interside.org/contato-imagem
Permalink
Good night Daniel, managed to solve? I'm the same q your DVR. It is to get me the Firmware ? sos.impressora@gmail.com
Permalink
good afternoon need to reset password dvr Kankai ahd-9016
Permalink
Good afternoon,
Sends me a front picture of DVR, a photo of the login screen and a picture of the login page, the form on the link below.
https://www.interside.org/contato-imagem
Permalink
Friend have a DVR 8ch Luxvision I need to reset; ever used 4 programinhas password access and nothing!! Could you please help me date that appears is 2017-03-28
Permalink
Good afternoon,
Sends me a front picture of DVR, a photo of the login screen and a picture of the login page, the form on the link below.
https://www.interside.org/contato-imagem
Permalink
Congratulations. Super helpful.
Permalink
Good Morning, I need to reset the password, the default is not working how do, It is a COP-DVR16ECON
Permalink
Good afternoon,
You know the DVR IP?
Permalink
I also need to reset this dvr, have the telnet password?